EnviroNylon N6GM40

Grade Type Nylon 6

Product Characteristics
Material Status Active Form Pellet
Availability North America Color Gen Purpose Black and Custom Black
Features High Stiffness Uses Injection Molding
Filler / Reinforcement 40% Glass/Mineral
Physical Value Unit Method
Ash Content 40 % ISO 1133
Specific Gravity 1.47 g/cm³ ISO 1183
Flexural Modulus 8.5 GPa ISO 178
Flexural Strength 167 MPa ISO 178
Tensile Elongation @ Break 4 % ISO 527 1&2
Tensile Strength 117 MPa ISO 527 1&2
Gardner Impact 48 in-lb Internal Method
DTUL @ 66PSI - Unannealed 215 C ISO 75-2

The typical results reported are believed to be accurate based on internal test procedures. Due to variable conditions or methods of processing, no guarantees or warranties are expressed or implied including the implied warranty of merchantability and fitness for a particular purpose. Manufacturer assumes no liability or responsibility for any loss or damage as the result of the use of this product. No statement contained herein is to be construed as a recommendation to use any product or process in conflict with any patent.