EnviroPCABS 5012

Grade Type PC/ABS

Product Characteristics
Material Status Active Form Pellet
Availability North America Color Natural, Black, Pre-Colored
Features High Impact Uses Injection Molding
Filler / Reinforcement Unfilled
Physical Value Unit Method
Melt Flow Rate 20 g/10min, 260C/5Kg ASTM D1238
Mold Shrink .006-.008 Flow Internal Method
Specific Gravity 1.13 g/cm³ ISO 1183
Mechanical
Flexural Modulus 2160 Mpa ISO 178
Tensile Strength 52 MPa ISO 527-2/5
Impact
Gardner Impact 320+ in-lb Internal Method
Notched IZOD Impact, 23C 12.0 ft·lb/in ASTM D256

The typical results reported are believed to be accurate based on internal test procedures. Due to variable conditions or methods of processing, no guarantees or warranties are expressed or implied including the implied warranty of merchantability and fitness for a particular purpose. Manufacturer assumes no liability or responsibility for any loss or damage as the result of the use of this product. No statement contained herein is to be construed as a recommendation to use any product or process in conflict with any patent.