EnviroTPE 80A

Grade Type TPV

Product Characteristics
Material Status Active Form Pellet
Availability North America Color Black
Features General Purpose Uses Injection Molding
Filler / Reinforcement
Physical Value Unit Method
Melt Flow Rate 2.0 g/10 min, 230C/3.8Kg ASTM D1238
Specific Gravity 0.98 g/cm³ ASTM D792
Mechanical
Tensile Elongation @ Yield 200 % ISO 527-2/5
Tensile Strength 8 MPa ISO 527-2/5
Hardness
Shore Hardness 80 Shore A, 23°C, 15 Second Delay ISO 868
Elastomers
Compression Set, 125C, 70 HRS 25 % Internal Method

The typical results reported are believed to be accurate based on internal test procedures. Due to variable conditions or methods of processing, no guarantees or warranties are expressed or implied including the implied warranty of merchantability and fitness for a particular purpose. Manufacturer assumes no liability or responsibility for any loss or damage as the result of the use of this product. No statement contained herein is to be construed as a recommendation to use any product or process in conflict with any patent.